• China New Product Unaflex Rubber Expansion Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    China New Product Unaflex Rubber Expansion Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Our available goods The spool type rubber joint is molded type, with a metal collar reinforced at the neck of the body. The ST stype uses a light reaining ring to support the integral flange. STF is filled arch, with 50% of the ST allowed movements, but it has 4 times spring rates than hollow arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 ...
  • Best Price on Safetech Non-Metallic Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Best Price on Safetech Non-Metallic Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Our available goods The spool type rubber joint is molded type, with a metal collar reinforced at the neck of the body. The ST stype uses a light reaining ring to support the integral flange. STF is filled arch, with 50% of the ST allowed movements, but it has 4 times spring rates than hollow arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 ...
  • China Supplier Thermal Rubber Expansion Joint - A-2 ~Double Arch Rubber Expansion Joint – Lide

    China Supplier Thermal Rubber Expansion Joint - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Our available goods Double-arch products are used where more movement is needed. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mp...
  • Factory wholesale Tideflex Non-Metallic Expansion Joint - A-5 ~Threaded Union – Lide

    Factory wholesale Tideflex Non-Metallic Expansion Joint - A-5 ~Threaded Union – Lide

    Our available goods Threaded unions is used When an economical threaded pipe connection is needed, the surface of the union is available both hot-dip galvanizing and electroplating. Both ends provided with a malleable iron union with female thread BS or ANSI. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 (48) 5.5 (55) Vacuum Kpa (Kgf/Cm2)...
  • Best Price on Rubber Pipe Joint - A-5 ~Threaded Union – Lide

    Best Price on Rubber Pipe Joint - A-5 ~Threaded Union – Lide

    Our available goods Threaded unions is used When an economical threaded pipe connection is needed, the surface of the union is available both hot-dip galvanizing and electroplating. Both ends provided with a malleable iron union with female thread BS or ANSI. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 (48) 5.5 (55) Vacuum Kpa (Kgf/Cm2)...
  • Good quality Plumbing Rubber Expansion Joint - A-7 ~Rubber Pipe Connector – Lide

    Good quality Plumbing Rubber Expansion Joint - A-7 ~Rubber Pipe Connector – Lide

    Our available goods Rubber Pipe is an economical, abrasion-resistant replacement for steel and cast iron pipe, either in straight lengths or where a specified radius is required. B-1 Rubber Pipe may be used in conveying ore, corrosive chemicals, sand,and other abrasive slurries. It is absolutely necessary that rigid metal pipe on both ends of the pipe be properly anchored to eliminate the danger of excessive elongation. If the pipeline is not anchored, control units should be used. Material: ...
  • Best Price for Epdm Expansion Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Best Price for Epdm Expansion Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Our available goods The single-arch product can reduce the vibration and noise, which can also solve the axial/lateral/angular movements/eccentric problems. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Specifications I II III Working Pressu...
  • Hot sale Ptfe Non-Metallic Rubber Joints - A-6 ~Control Units – Lide

    Hot sale Ptfe Non-Metallic Rubber Joints - A-6 ~Control Units – Lide

    Our available goods A control unit assembly is a system of two or more control rods placed across an expansion joint from flange to flange to minimize possible damage to the expansion joint caused by excessive motion of the pipeline. The control rod assemblies are set at the maximum allowable expansion and/or contraction of the joint and will absorb the static pressure thrust developed at the expansion joint. When used in this manner, they are an additional safety factor, minimizing possible ...
  • Professional China Moulded Rubber Bellows - A-7 ~Rubber Pipe Connector – Lide

    Professional China Moulded Rubber Bellows - A-7 ~Rubber Pipe Connector – Lide

    Our available goods Rubber Pipe is an economical, abrasion-resistant replacement for steel and cast iron pipe, either in straight lengths or where a specified radius is required. B-1 Rubber Pipe may be used in conveying ore, corrosive chemicals, sand,and other abrasive slurries. It is absolutely necessary that rigid metal pipe on both ends of the pipe be properly anchored to eliminate the danger of excessive elongation. If the pipeline is not anchored, control units should be used. Material: ...
  • New Fashion Design for Epdm Rubber Gakset - A-4 ~Spool Type Rubber Expansion Joint – Lide

    New Fashion Design for Epdm Rubber Gakset - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Our available goods The spool type rubber joint is molded type, with a metal collar reinforced at the neck of the body. The ST stype uses a light reaining ring to support the integral flange. STF is filled arch, with 50% of the ST allowed movements, but it has 4 times spring rates than hollow arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 ...
  • China Factory for Filled Arch Rubber Expansion Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    China Factory for Filled Arch Rubber Expansion Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Our available goods The spool type rubber joint is molded type, with a metal collar reinforced at the neck of the body. The ST stype uses a light reaining ring to support the integral flange. STF is filled arch, with 50% of the ST allowed movements, but it has 4 times spring rates than hollow arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 ...
  • High definition Pump Expansion Joint - A-2 ~Double Arch Rubber Expansion Joint – Lide

    High definition Pump Expansion Joint - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Our available goods Double-arch products are used where more movement is needed. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mp...
123456 Next > >> Page 1 / 304